Computer latency: 1977-2017 | Patreon

I've had this nagging feeling that the computers I use today feel slower than the computers I used as a kid. As a rule, I don’t trust this kind of feeling because human perception has been shown to be unreliable in empirical studies, so I carried around a high-speed camera and measured the response latency of devices I’ve run into in the past few months. Here are the results:

yearclock# T
apple 2e3019831 MHz3.5k
ti 99/4a4019813 MHz8k
custom haswell-e 165Hz5020143.5 GHz2G
commodore pet 40166019771 MHz3.5k
sgi indy601993.1 GHz1.2M
custom haswell-e 120Hz6020143.5 GHz2G
thinkpad 13 chromeos7020172.3 GHz1G
imac g4 os 9702002.8 GHz11M
custom haswell-e 60Hz8020143.5 GHz2G
mac color classic90199316 MHz273k
powerspec g405 linux 60Hz9020174.2 GHz2G
macbook pro 201410020142.6 GHz700M
thinkpad 13 linux chroot10020172.3 GHz1G
lenovo x1 carbon 4g linux11020162.6 GHz1G
imac g4 os x1202002.8 GHz11M
custom haswell-e 24Hz14020143.5 GHz2G
lenovo x1 carbon 4g win15020162.6 GHz1G
next cube150198825 MHz1.2M
powerspec g405 linux17020174.2 GHz2G
packet around the world190
powerspec g405 win20020174.2 GHz2G
symbolics 362030019865 MHz390k

These are tests of the latency between a keypress and the display of a character in a terminal (see appendix for more details). The results are sorted from quickest to slowest. In the latency column, the background goes from green to yellow to red to black as devices get slower and the background gets darker as devices get slower. No devices are green. When multiple OSes were tested on the same machine, the os is in bold. When multiple refresh rates were tested on the same machine, the refresh rate is in italics.

In the year column, the background gets darker and purple-er as devices get older. If older devices were slower, we’d see the year column get darker as we read down the chart.

The next two columns show the clock speed and number of transistors in the processor. Smaller numbers are darker and blue-er. As above, if slower clocked and smaller chips correlated with longer latency, the columns would get darker as we go down the table, but it, if anything, seems to be the other way around.

For reference, the latency of a packet going around the world through fiber from NYC back to NYC via Tokyo and London is inserted in the table.

If we look at overall results, the fastest machines are ancient. Newer machines are all over the place. Fancy gaming rigs with unusually high refresh-rate displays are almost competitive with machines from the late 70s and early 80s, but “normal” modern computers can’t compete with thirty to forty year old machines.

We can also look at mobile devices. In this case, we’ll look at scroll latency in the browser:

ipad pro 10.5" pencil302017
ipad pro 10.5"702017
iphone 4s702011
iphone 6s702015
iphone 3gs702009
iphone x802017
iphone 8802017
iphone 7802016
iphone 6802014
gameboy color801998
iphone 5902012
blackberry q101002013
huawei honor 81102016
google pixel 2 xl1102017
galaxy s71202016
galaxy note 31202016
moto x1202013
nexus 5x1202015
oneplus 3t1302016
blackberry key one1302017
moto e (2g)1402015
moto g4 play1402017
moto g4 plus1402016
google pixel1402016
samsung galaxy avant1502014
asus zenfone3 max1502016
sony xperia z5 compact1502015
htc one m41602013
galaxy s4 mini1702013
lg k41802016
htc rezound2402011
palm pilot 10004901996
kindle oasis 25702017
kindle paperwhite 36302015
kindle 48602011

As above, the results are sorted by latency and color-coded from green to yellow to red to black as devices get slower. Also as above, the year gets purple-er (and darker) as the device gets older.

If we exclude the game boy color, which is a different class of device than the rest, all of the quickest devices are Apple phones or tablets. The next quickest device is the blackberry q10. Although we don’t have enough data to really tell why the blackberry q10 is unusually quick for a non-Apple device, one plausible guess is that it’s helped by having actual buttons, which are easier to implement with low latency than a touchscreen. The other two devices with actual buttons are the gameboy color and the kindle 4.

After that iphones and non-kindle button devices, we have a variety of Android devices of various ages. At the bottom, we have the ancient palm pilot 1000 followed by the kindles. The palm is hamstrung by a touchscreen and display created in an era with much slower touchscreen technology and the kindles use e-ink displays, which are much slower than the displays used on modern phones, so it’s not surprising to see those devices at the bottom.

Why is the apple 2e so fast?

Compared to a modern computer that’s not the latest ipad pro, the apple 2 has significant advantages on both the input and the output, and it also has an advantage between the input and the output for all but the most carefully written code since the apple 2 doesn’t have to deal with context switches, buffers involved in handoffs between different processes, etc.

On the input, if we look at modern keyboards, it’s common to see them scan their inputs at 100 Hz to 200 Hz (e.g., the ergodox claims to scan at 167 Hz). By comparison, the apple 2e effectively scans at 556 Hz. See appendix for details.

If we look at the other end of the pipeline, the display, we can also find latency bloat there. I have a display that advertises 1 ms switching on the box, but if we look at how long it takes for the display to actually show a character from when you can first see the trace of it on the screen until the character is solid, it can easily be 10 ms. You can even see this effect with some high-refresh-rate displays that are sold on their allegedly good latency.

At 144 Hz, each frame takes 7 ms. A change to the screen will have 0 ms to 7 ms of extra latency as it waits for the next frame boundary before getting rendered (on average,we expect half of the maximum latency, or 3.5 ms). On top of that, even though my display at home advertises a 1 ms switching time, it actually appears to take 10 ms to fully change color once the display has started changing color. When we add up the latency from waiting for the next frame to the latency of an actual color change, we get an expected latency of 7/2 + 10 = 13.5ms

With the old CRT in the apple 2e, we’d expect half of a 60 Hz refresh (16.7 ms / 2) plus a negligible delay, or 8.3 ms. That’s hard to beat today: a state of the art “gaming monitor” can get the total display latency down into the same range, but in terms of marketshare, very few people have such displays, and even displays that are advertised as being fast aren’t always actually fast.

iOS rendering pipeline

If we look at what’s happening between the input and the output, the differences between a modern system and an apple 2e are too many to describe without writing an entire book. To get a sense of the situation in modern machines, here’s former iOS/UIKit engineer Andy Matuschak’s high-level sketch of what happens on iOS, which he says should be presented with the disclaimer that “this is my out of date memory of out of date information”:

Andy says “the actual amount of work happening here is typically quite small. A few ms of CPU time. Key overhead comes from:”

By comparison, on the Apple 2e, there basically aren’t handoffs, locks, or process boundaries. Some very simple code runs and writes the result to the display memory, which causes the display to get updated on the next scan.

Refresh rate vs. latency

One thing that’s curious about the computer results is the impact of refresh rate. We get a 90 ms improvement from going from 24 Hz to 165 Hz. At 24 Hz each frame takes 41.67 ms and at 165 Hz each frame takes 6.061 ms. As we saw above, if there weren’t any buffering, we’d expect the average latency added by frame refreshes to be 20.8ms in the former case and 3.03 ms in the latter case (because we’d expect to arrive at a uniform random point in the frame and have to wait between 0ms and the full frame time), which is a difference of about 18ms. But the difference is actually 90 ms, implying we have latency equivalent to (90 - 18) / (41.67 - 6.061) = 2 buffered frames.

If we plot the results from the other refresh rates on the same machine (not shown), we can see that they’re roughly in line with a “best fit” curve that we get if we assume that, for that machine running powershell, we get 2.5 frames worth of latency regardless of refresh rate. This lets us estimate what the latency would be if we equipped this low latency gaming machine with an infinity Hz display -- we’d expect latency to be 140 - 2.5 * 41.67 = 36 ms, almost as fast as quick but standard machines from the 70s and 80s.


Almost every computer and mobile device that people buy today is slower than common models of computers from the 70s and 80s. Low-latency gaming desktops and the ipad pro can get into the same range as quick machines from thirty to forty years ago, but most off-the-shelf devices aren’t even close.

If we had to pick one root cause of latency bloat, we might say that it’s because of “complexity”. Of course, we all know that complexity is bad. If you’ve been to a non-academic non-enterprise tech conference in the past decade, there’s a good chance that there was at least one talk on how complexity is the root of all evil and we should aspire to reduce complexity.

Unfortunately, it's a lot harder to remove complexity than to give a talk saying that we should remove complexity. A lot of the complexity buys us something, either directly or indirectly. When we looked at the input of a fancy modern keyboard vs. the apple 2 keyboard, we saw that using a relatively powerful and expensive general purpose processor to handle keyboard inputs can be slower than dedicated logic for the keyboard, which would both be simpler and cheaper. However, using the processor gives people the ability to easily customize the keyboard, and also pushes the problem of “programming” the keyboard from hardware into software, which reduces the cost of making the keyboard. The more expensive chip increases the manufacturing cost, but considering how much of the cost of these small-batch artisanal keyboards is the design cost, it seems like a net win to trade manufacturing cost for ease of programming.

We see this kind of tradeoff in every part of the pipeline. One of the biggest examples of this is the OS you might run on a modern desktop vs. the loop that’s running on the apple 2. Modern OSes let programmers write generic code that can deal with having other programs simultaneously running on the same machine, and do so with pretty reasonable general performance, but we pay a huge complexity cost for this and the handoffs involved in making this easy result in a significant latency penalty.

A lot of the complexity might be called accidental complexity, but most of that accidental complexity is there because it’s so convenient. At every level from the hardware architecture to the syscall interface to the I/O framework we use, we take on complexity, much of which could be eliminated if we could sit down and re-write all of the systems and their interfaces today, but it’s too inconvenient to re-invent the universe to reduce complexity and we get benefits from economies of scale, so we live with what we have.

For those reasons and more, in practice, the solution to poor performance caused by “excess” complexity is often to add more complexity. In particular, the gains we’ve seen that get us back to the quickness of the quickest machines from thirty to forty years ago have come not from listening to exhortations to reduce complexity, but from piling on more complexity.

The ipad pro is a feat of modern engineering; the engineering that went into increasing the refresh rate on both the input and the output as well as making sure the software pipeline doesn’t have unnecessary buffering is complex! The design and manufacture of high-refresh-rate displays that can push system latency down is also non-trivially complex in ways that aren’t necessary for bog standard 60 Hz displays.

This is actually a common theme when working on latency reduction. A common trick to reduce latency is to add a cache, but adding a cache to a system makes it more complex. For systems that generate new data and can’t tolerate a cache, the solutions are often even more complex. An example of this might be large scale RoCE deployments. These can push remote data access latency from from the millisecond range down to the microsecond range, which enables new classes of applications. However, this has come at a large cost in complexity. Early large-scale RoCE deployments easily took tens of person years of effort to get right and also came with a tremendous operational burden.


It’s a bit absurd that a modern gaming machine running at 4,000x the speed of an apple 2, with a CPU that has 500,000x as many transistors (with a GPU that has 2,000,000x as many transistors) can maybe manage the same latency as an apple 2 in very carefully coded applications if we have a monitor with nearly 3x the refresh rate. It’s perhaps even more absurd that the default configuration of the powerspec g405, which had the fastest single-threaded performance you could get until October 2017, had more latency from keyboard-to-screen (approximately 3 feet, maybe 10 feet of actual cabling) than sending a packet around the world (16187 mi from NYC to Tokyo to London back to NYC, more due to the cost of running the shortest possible length of fiber).

On the bright side, we’re arguably emerging from the latency dark ages and it’s now possible to assemble a computer or buy a tablet with latency that’s in the same range as you could get off-the-shelf in the 70s and 80s. This reminds me a bit of the screen resolution & density dark ages, where CRTs from the 90s offered better resolution and higher pixel density than affordable non-laptop LCDs until relatively recently. 4k displays have now become normal and affordable 8k displays are on the horizon, blowing past anything we saw on consumer CRTs. I don’t know that we’ll see the same kind improvement with respect to latency, but one can hope. There are individual developers improving the experience for people who use certain, very carefully coded, applications, but it's not clear what force could cause a significant improvement in the default experience most users see.

Appendix: why measure latency?

Latency matters! For very simple tasks, people can perceive latencies down to 2 ms or less. Moreover, increasing latency is not only noticeable to users, it causes users to execute simple tasks less accurately. If you want a visual demonstration of what latency looks like and you don’t have a super-fast old computer lying around, check out this MSR demo on touchscreen latency.

The most commonly cited document on response time is the nielsen group article on response times, which claims that latncies below 100ms feel equivalent and perceived as instantaneous. One easy way to see that this is false is to go into your terminal and try sleep 0; echo "pong" vs. sleep 0.1; echo "test" (or for that matter, try playing an old game that doesn't have latency compensation, like quake 1, with 100 ms ping, or even 30 ms ping, or try typing in a terminal with 30 ms ping). For more info on this and other latency fallacies, see this document on common misconceptions about latency.

Throughput also matters, but this is widely understood and measured. If you go to pretty much any mainstream review or benchmarking site, you can find a wide variety of throughput measurements, so there’s less value in writing up additional throughput measurements.

Appendix: apple 2 keyboard

The apple 2e, instead of using a programmed microcontroller to read the keyboard, uses a much simpler custom chip designed for reading keyboard input, the AY 3600. If we look at the AY 3600 datasheet,we can see that the scan time is (90 * 1/f) and the debounce time is listed as strobe_delay. These quantities are determined by some capacitors and a resistor, which appear to be 47pf, 100k ohms, and 0.022uf for the Apple 2e. Plugging these numbers into the AY3600 datasheet, we can see that f = 50 kHz, giving us a 1.8 ms scan delay and a 6.8 ms debounce delay (assuming the values are accurate -- capacitors can degrade over time, so we should expect the real delays to be shorter on our old Apple 2e), giving us less than 8.6 ms for the internal keyboard logic.

Comparing to a keyboard with a 167 Hz scan rate that scans two extra times to debounce, the equivalent figure is 3 * 6 ms = 18 ms. With a 100Hz scan rate, that becomes 3 * 10 ms = 30 ms. 18 ms to 30 ms of keyboard scan plus debounce latency is in line with what we saw when we did some preliminary keyboard latency measurements.

For reference, the ergodox uses a 16 MHz microcontroller with ~80k transistors and the apple 2e CPU is a 1 MHz chip with 3.5k transistors.

Appendix: why should android phones have higher latency than old apple phones?

As we've seen, raw processing power doesn't help much with many of the causes of latency in the pipeline, like handoffs between different processes, so phones that an android phone with a 10x more powerful processor than an ancient iphone isn't guaranteed to be quicker to respond, even if it can render javascript heavy pages faster.

If you talk to people who work on non-Apple mobile CPUs, you'll find that they run benchmarks like dhrystone (a synthetic benchmark that was irrelevant even when it was created, in 1984) and SPEC2006 (an updated version of a workstation benchmark that was relevant in the 90s and perhaps even as late as the early 2000s if you care about workstation workloads, which are completely different from mobile workloads). This problem where the vendor who makes the component has an intermediate target that's only weakly correlated to the actual user experience. I've heard that there are people working on the pixel phones who care about end-to-end latency, but it's difficult to get good latency when you have to use components that are optimized for things like dhrystone and SPEC2006.

If you talk to people at Apple, you'll find that they're quite cagey, but that they've been targeting the end-to-end user experience for quite a long time and they they can do "full stack" optimizations that are difficult for android vendors to pull of. They're not literally impossible, but making a change to a chip that has to be threaded up through the OS is something you're very unlikely to see unless google is doing the optimization, and google hasn't really been serious about the end-to-end experience until recently.

Having relatively poor performance in aspects that aren't measured is a common theme and one we saw when we looked at terminal latency. Prior to examining temrinal latency, public benchmarks were all throughput oriented and the terminals that priortized performance worked on increasing throughput, even though increasing terminal throughput isn't really useful. After those terminal latency benchmarks, some terminal authors looked into their latency and found places they could trim down buffering and remove latency. You get what you measure.

Appendix: experimental setup

Most measurements were taken with the 240fps camera (4.167 ms resolution) in the iPhone SE. Devices with response times below 40 ms were re-measured with a 1000fps camera (1 ms resolution), the Sony RX100 V in PAL mode. Results in the tables are the results of multiple runs and are rounded to the nearest 10 ms to avoid the impression of false precision. For desktop results, results are measured from when the key started moving until the screen finished updating. Note that this is different from most key-to-screen-update measurements you can find online, which typically use a setup that effectively removes much or all of the keyboard latency, which, as an end-to-end measurement, is only realistic if you have a psychic link to your computer (this isn't to say the measurements aren't useful -- if, as a programmer, you want a reproducible benchmark, it's nice to reduce measurement noise from sources that are beyond your control, but that's not relevant to end users). People often advocate measuring from one of: {the key bottoming out, the tactile feel of the switch}. Other than for measurement convenience, there appears to be no reason to do any of these, but people often claim that's when the user expects the keyboard to "really" work. But these are independent of when the switch actually fires. Both the distance between the key bottoming out and activiation as well as the distance between feeling feedback and activation are arbitrary and can be tuned. See this post on keyboard latency measurements for more info on keyboard fallacies.

Another significant difference is that measurements were done with settings as close to the default OS settings as possible since approximately 0% of users will futz around with display settings to reduce buffering, disable the compositor, etc. Waiting until the screen has finished updating is also different from most end-to-end measurements do -- most consider the update "done" when any movement has been detected on the screen. Waiting until the screen is finished changing is analogous to webpagetest's "visually complete" time.

Computer results were taken using the “default” terminal for the system (e.g., powershell on windows, lxterminal on lubuntu), which could easily cause 20 ms to 30 ms difference between a fast terminal and a slow terminal. Between measuring time in a terminal and measuring the full end-to-end time, measurements in this article should be slower than measurements in other, similar, articles (which tend to measure time to first change in games).

The powerspec g405 baseline result is using integrated graphics (the machine doesn’t come with a graphics card) and the 60 Hz result is with a cheap video card. The baseline was result was at 30 Hz because the integrated graphics only supports hdmi output and the display it was attached to only runs at 30 Hz over hdmi.

Mobile results were done by using the default browser, browsing to, and measuring the latency from finger movement until the screen first updates to indicate that scrolling has occurred. In the cases where this didn’t make sense, (kindles, gameboy color, etc.), some action that makes sense for the platform was taken (changing pages on the kindle, pressing the joypad on the gameboy color in a game, etc.). Unlike with the desktop/laptop measurements, this end-time for the measurement was on the first visual change to avoid including many frames of scrolling. To make the measurement easy, the measurement was taken with a finger on the touchscreen and the timer was started when the finger started moving (to avoid having to determine when the finger first contacted the screen).

In the case of “ties”, results are ordered by the unrounded latency as a tiebreaker, but this shouldn’t be considered significant. Differences of 10 ms should probably also not be considered significant.

The custom haswell-e was tested with gsync on and there was no observable difference. The year for that box is somewhat arbitrary, since the CPU is from 2014, but the display is newer (I believe you couldn’t get a 165 Hz display until 2015.

The number of transistors for some modern machines is a rough estimate because exact numbers aren’t public. Feel free to ping me if you have a better estimate!

The color scales for latency and year are linear and the color scales for clock speed and number of transistors are log scale.

All Linux results were done with a pre-KPTI kernel. It's possible that KPTI will impact user perceivable latency.

Measurements were done as cleanly as possible (without other things running on the machine/device when possible, with a device that was nearly full on battery for devices with batteries). Latencies when other software is running on the device or when devices are low on battery might be much higher.

If you want a reference to compare the kindle against, a moderately quick page turn in a physical book appears to be about 200 ms.

This is a work in progress. I expect to get benchmarks from a lot more old computers the next time I visit Seattle. If you know of old computers I can test in the NYC area (that have their original displays or something like them), let me know! If you have a device you’d like to donate for testing, feel free to mail it to

Dan Luu
Recurse Center
455 Broadway, 2nd Floor
New York, NY 10013

Thanks to RC, David Albert, Bert Muthalaly, Christian Ternus, Kate Murphy, Ikhwan Lee, Peter Bhat Harkins, Leah Hanson, Alicia Thilani Singham Goodwin, Amy Huang, Dan Bentley, Jacquin Mininger, Rob, Susan Steinman, Raph Levien, Max McCrea, Peter Town, Jon Cinque, Anonymous, and Jonathan Dahan for donating devices to test and thanks to Leah Hanson, Andy Matuschak, Milosz Danczak, amos (@fasterthanlime), @emitter_coupled, Josh Jordan, mrob, and David Albert for comments/corrections/discussion.